Key Features
Intel® Xeon® E-2300 Processor, 10th Generation Intel® Pentium® Processor, Single Socket LGA-1200 (Socket H5) supported, CPU supports Up to 95W TDP
Intel® C252
Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz, in 4 DIMM slots
1 PCIe 4.0 x8,
1 PCIe 4.0 x8 (in x16 slot),
1 PCIe 4.0 x4 (in x8 slot)1 PCIe 3.0 x2 (in x4 slot)
M.2 Interface: 1 PCIe 3.0 x4
M.2 Form Factor: 2280/22110
M.2 Key: M-Key
Dual LAN with 1GbE with Intel® I210
Intel® C252 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
1 VGA D-Sub Connector port
2 SuperDOM with built-in power
5x USB 3.2 Gen1 (2 rear, 1 Type-A, 2 via header), 4x USB 2.0 (2 rear, 2 via headers)
DOES NOT SUPPORT ECC REGISTERED MEMORY |
Physical Stats
|
Form Factor microATX Dimension 9.6" x 9.6" (24.38cm x 24.38cm)
|
|
Processor |
CPU 10th Generation Intel® Pentium® Processor, Intel® Xeon® E-2300 Processor Single Socket LGA-1200 (Socket H5) supported, CPU TDP supports Up to 95W TDP Core Up to 8 cores
|
|
System Memory
|
Memory Capacity 4 DIMM slots Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MHz Memory Type 3200/2933/2666MHz SDRAM DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errors
|
|
On-Board Devices
|
Chipset Intel® C252 SATA Intel® C252 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 IPMI ASPEED AST2600 BMC Graphics ASPEED AST2600 BMC Network Controllers Dual LAN with 1GbE with Intel® I210
|
|
Input / Output |
SATA 6 SATA3 (6Gbps) port(s) LAN 2 1GbE LAN ports USB 4 USB 2.0 port(s) (2 rear; 2 via header) 5 USB 3.2 Gen1 port(s) (2 via header; 2 rear; 1 type A) Video Output 1 VGA D-Sub Connector port(s) Serial Port 2 COM Port(s) (1 header; 1 rear) DOM 2 SuperDOM (Disk on Module) power connector TPM 1 TPM Header
|
|
Expansion Slots
|
PCI-E 1 PCI-E 4.0 x8 (in x16 slot), 1 PCI-E 4.0 x8, 1 PCI-E 4.0 x4 (in x8 slot), 1 PCI-E 3.0 x2 (in x4 slot) M.2 M.2 Interface: 1 PCI-E 3.0 x4 Form Factor: 2280/22110 Key: M-Key
|
|
System BIOS |
BIOS Type 256MB UEFI BIOS Features ACPI 6.0 SMBIOS 3.3 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0
|
|
Management |
Software SuperDoctor® 5, SUM, SPM, SSM, IPMI2.0, Watchdog System Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support Power Configurations Power-on mode for AC power recovery, ACPI Power Management
|
|
PC Health Monitoring
|
Voltage VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, 3.3V standby, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages LED UID/Remote UID BMC/IPMI Heartbeat LED Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI FAN 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors Fan speed control 6 fans with tachometer status monitoring Overheat LED indication Other Features WOL UID M.2 NGFF connector Dual Cooling Zones CPU thermal trip support for processor protection Control of power-on for recovery from AC power loss Chassis intrusion detection ACPI power management
|
|
Operating Environment |
Operating Temperature Range 0°C - 50°C (32°F - 122°F) Non-Operating Temperature Range -20°C - 60°C (-4°F - 140°F) Operating Relative Humidity Range 10% - 85% (non-condensing) Non Operating Relative Humidity Range
|